|
Bradley Smoker Temperature Controller |
|
|
|
|
Written by Administrator
|
|
Monday, 29 October 2007 |
|
Page 2 of 8
Others have housed the controller in it's own box, and have dangled
the thermocouple into the smoke box through the top vent; I chose to mount
the controller in the smoke generator, and mount the thermocouple through the back
wall of the smoke box, right next to what I believe to be an over-temperature
cutoff switch.
I began the project by spreading out newspaper on the kitchen table, and disassembling the smoke generator.
** DISCONNECT ALL POWER CORDS FROM THE SMOKE GENERATOR BEFORE DISASSEMBLING **
** DON'T WORK ON ANYTHING WITH THE POWER CORD PLUGGED IN ** The screws circled are the ones to remove to get the unit apart. 
(continued)
|
|
Last Updated ( Wednesday, 31 October 2007 )
|